<\/p>\n
DESCRIPTION:<\/strong><\/p>\n Reference K9115101 Kenta gearmotor for pellet stoves Speed: 2.5 rpm. Reed valve pack: 30 mm. Shaft diameter: 8.5 mm. Flattening: single. Direction of rotation: clockwise. Nominal torque: 20 Nm.<\/p>\n <\/p>\n Suitable for applications where low speed and high torque are required, the Kenta K9115101 gearmotor is specifically designed to be used as a rotor to power pellet stoves. 911 series, nominal torque 20Nm, absorption 28Watt, speed 2.5rpm, clockwise rotation, shaft diameter 8.5mm, 30mm reed valve pack, power supply 220 V AC – 50\/60Hz.<\/p>\n <\/p>\n INTERCHANGEABLE WITH THE FOLLOWING MODELS<\/strong><\/p>\n KENTA<\/strong> : K9175155 BCZ<\/strong> : 504<\/p>\n <\/p>\n MOUNT ON STOVES<\/strong><\/p>\n -ADLER<\/strong> <\/p>\n USING THE GEAR MOTOR K9115101<\/strong><\/p>\n The Kenta 2.5 rpm gear motor Code K9115101 proposed by Xodostore \u2013 Shaft \u00f8 8.5 mm \u2013 30 mm lamellar pack installed on pellet appliances has the task of rotating the auger in the pellet tank, transporting it to the crucible to be burned, or the increasingly used automatic brazier cleaning systems present on many biomass stoves and boilers. The auger is positioned in such a way as to pick up the pellets from the bottom of the tank and then transport them towards the top of the stove Once at the top of the auger, the pellets naturally fall into a chute that will accompany them inside the burner<\/p>\n <\/p>\n MAIN FEATURES OF KENTA GEARED MOTORS<\/strong><\/p>\n The gearbox box is made of die-cast zamak and incorporates fixings <\/p>\n <\/p>\n
\n-CLAM <\/strong>spare part code 05010034 Niagara models – Retro – Vintage – Vittoria 20 kW – Vittoria 26 kW – Tivoli 26 kW first series
\n-DEVILLE<\/strong>
\n-ECOWOOD<\/strong>
\n-GREEN PUROS<\/strong>
\n-KAUSIFLAM<\/strong>
\n-PUROS<\/strong>
\n-ARENAS<\/strong>
\n-VULCANIA<\/strong><\/p>\n
\nfor the application. The kinematic chain of the gears consists of: helical tooth crankshaft, gears made of special thermoplastic materials and gears made of sintered steel. This system guarantees high reliability by allowing K911 gearmotors the possibility of applications in cold (e.g. chillers) and hot (e.g. ovens) environments. The gearbox housing has 2 through fixing holes and 5 fixing holes with a maximum penetration of 4 mm. The K911 AC gearmotors use two-pole single-phase asynchronous motors with short-circuit turns and
\npre-set direction of rotation. The dimensions of the engines are fixed in terms of width and height (61 x 61
\nmm) while the thickness of the engine pack is available in 4 sizes: 16 \u2013 20 \u2013 30 \u2013 40 mm. The winding of the coils is made by means of an automatic system equipped with wire-stabilized
\n tension control. The electrical connections are made by means of 6.3 x 0.8 fastons applied with a solderless insulation displacement system (UL approved Amtronics system) which prevents false contacts. Available voltages and frequencies: from 24 to 240 V and 50\/60 Hz.
\nThe K911 DC geared motors use brushed DC motors with permanent magnet
\nfor 12 and 24 V power supply. These motors allow for dual rotation<\/p>\n