5-star hermetic pellet stove MONTEGRAPPA NXS 10 EVO TILE EVO

Description

5-star hermetic pellet stove MONTEGRAPPA NXS 10 EVO TILE EVO

Square shape and rigorous design, the front and plinth are decorated with a geometric pattern. The cladding of Tile Evo is in majolica, the structure in painted steel. Tile Evo is available in three colours: matt white, dove grey, glossy burgundy.

– Control panel equipped with backlit graphic display with digital icons TOUCH SCREEN – SMART ventilation: advanced software for the intelligent management of the ambient air fan that allows the stove to operate in silent mode ensuring excellent comfort – Intuitive software with setting of both the room temperature and the maximum operating power. Equipped with STAND-BY function to maintain the desired comfort of the indoor environment – Programmable thermostat with settable temperature and with the possibility of choosing the operating power of each programmed time slot – Continuously rotating gear motor – Electronic board with the possibility of managing external thermostats – Cylindrical cast iron burner equipped with flame breaker deflector – Ignition pipe inserted inside the burner, always guarantees perfect ignition of the product – TUTOR efficient combustion control system – Modern removable cast iron hearth sides – Double ducting, served by 2 independent centrifugal fans – Double flue gas circuit lateral to the combustion chamber – Advanced lateral heat exchanger, in steel, composed of tubular ducts and fins communicating between the sides of the combustion chamber and the external walls, for heating ducted air – Heat exchanger, rear and upper to the combustion chamber, made of steel, for heating ambient air – Probe for detecting the room temperature – Safety thermostat – Safety pressure gauge – Tangential ambient air fan – Removable ash drawer – Adjustable non-slip feet for correct leveling – Wi-Fi module (optional)

NXS 10 EVO TILE

body size + cover: L 42 x P 46 x H 109 cm

Technical data

mm

power

consumption

Mass

gas temperature

capacity

outlet pipe

power

Quality class (D.M. 186 – 7/11/2017)
overall heat output (at the hearth)	9.8		Kw
Certified	4.1 – 8.9		Kw
power output to ducting	2.5 + 2.5 (55%)		Kw
CO measured (at 13% oxygen)	0.0165		%
Yield (η)	90.9		%
Primary Particulate Matter (PP) at 13% oxygen	14		mg/Nm3
COT (at 13% oxygen)	4		mg/Nm3
Fuel	0.92 – 2.04		kg/h
flow rate of fumes	4.0 – 5.5		g/s
Flue	99-154		°C
draught (vacuum at the chimney)	9		Pa
Tank	18		Kg
autonomy	19.5 – 8.5		h
Smoke	Ø 80		Mm
air inlet for combustion	Ø 50		Mm
Heatable surface with certified	102		*sqm
net weight	77		Kg
Weight with packaging	88		Kg
* with the conditions shown in the General Catalogue
product in possession of the requirements for achieving the “5 stars” Clean Air