Description

Mellor gearmotor for pellet stove (Cod: FB1285) 3 rpm – 8.5 mm shaft – 32 mm pack (Rif.Int. 2019)

DESCRIPTION:

Reference FB1285 Gear motor for pellet stoves T3 series, 220VAC power supply. Speed: 3 rpm. Reed valve: 32 mm. Shaft diameter: 8.5 mm. Flattening: single. Direction of rotation: clockwise. Nominal torque: 26 Nm. Model with encoder

Suitable for use in applications where low speed and high torque are required, the FB1285 – DV3029 gearmotor is specifically designed to be used as a rotor to power pellet stoves. T3 series with encoder, nominal torque 26Nm, absorption 25Watt, speed 3rpm, clockwise rotation, shaft diameter 8.5mm, 32mm reed valve pack, power supply 220 V AC – 50/60Hz.

INTERCHANGEABLE WITH THE FOLLOWING MODELS

KENTA : K9117120

MOUNT ON STOVES

CLAM Cod. 05023012 – 05010034 Mod. Niagara – Victory 26 kW

USING THE FB1285 GEAR MOTOR

The Mellor 3 rpm gearmotor with encoder Code FB1285 – Shaft ø 8.5 mm – 32 mm lamellar pack proposed by Mack 4 seasons and installed on pellet appliances have the task of rotating the auger in the pellet tank transporting it to the crucible to be burned, or the increasingly used automatic brazier cleaning systems present on many biomass stoves and boilers. The auger is positioned in such a way as to pick up the pellets from the bottom of the tank and then transport them to the top of the stove Once at the top of the auger, the pellets naturally fall into a chute that will accompany them inside the burner.

MAIN FEATURES OF MELLOR GEARED MOTORS:
-Nominal torque: from 2.5 up to 35Nm, depending on the reduction
ratio-Available speed: from 0.3 to 11rpm-Typical
applications: all those that require bidirectional rotations with low and precise speed, high torque and very
low noise.
Designed for pellet stove, boiler and fireplace boiler applications