Kenta gearmotor for pellet stoves (Cod: K9115062). Speed: 2 rpm, Shaft diameter: 8.5 mm (Rif.Int. 2050)

Description

Kenta gearmotor for pellet stoves (Cod: K9115062). Speed: 2 rpm, Shaft diameter: 8.5 mm (Rif.Int. 2050)

DESCRIPTION

Reference K9115062

Suitable for applications where low speed and high torque are required, the Kenta K9115062 gearmotor is specifically designed to be used as a rotor to power pellet stoves. 911 series, nominal torque 25Nm, absorption 28Watt, speed 2rpm, clockwise rotation, shaft diameter 8.5mm, 30mm reed valve pack, power supply 220 V AC – 50/60Hz.

INTERCHANGEABLE WITH THE FOLLOWING MODELS

MELLOR : FB1193, FB1074, FB1054, FB1184, FB1274 KENTA : K9115062 MERKLE & KORFF : GM-S4471 SPG : ISG3230D005

MOUNT ON STOVES

-ADLER
-AMG
-ANSELMO COLA
-ARCE
-ARTEL
-BESTOVE Réf. PG.111.14 mod. Bravo – E-brio – Max – Nemo – Pico
-BURNIT
-CALECOSOL ref. R2600632 mod. Zhana -CAMINETTI MONTEGRAPPA ref. 1044000200 mod. PELLET Plus 14000 – PELLET Plus 15000 – PELLET Plus 15000 Power

-CLAM
-COLA
-ECOSPAR
-EDILKAMIN
-EUROALPI ref. R2600632 mod. Marmolada – Pasubio – Vezzana
-FOKO
-LINCAR
-MCZ
-MORETTI DESIGN ref. MFRML20 mod. A5 COMPACT – A6 IRON – A7 GLOBE – A7 GLOBE GLASS – C7 GLOBE – C7 GLOBE GLASS – A8 COMPACT – C8 COMPACT – A9 IRON – A9 STONE – C9 IRON – C9 STONE – A10 COMPACT – A10 SLOT – A10 STYLE – C10 COMPACT – C10 SLOT – C10 STYLE – A10 RETRO – A12 RETRO – A11 GLASS – A11 IRON – A11 STONE – C11 GLASS – C11 IRON – C11 STONE – ERGONOMIC – A12 STYLE – A12 CLASSIC STYLE – A12 ALL STYLE – C12 STYLE – C12 CLASSIC STYLE – C12 ALL STYLE – A13 STYLE – A13 ALL STYLE – C13 STYLE – C13 ALL STYLE – HOURGLASS – RELAX BIS 6 IRON – RELAX BIS 8 IRON – VENERE S – OLDY 9 – RAMSES – PRETTY PLUS – VIRGO – PRETTY > MAT: 04905001 -NORDICA EXTRAFLAME ref. 2271009 – 002271009 – 2271032 code FB1054 – FB1184 – FB1274 – Merkle 2.0 GM-S4471 CPT mod. Babyfiamma – Comfort idro – Comfort Mini – Comfort Maxi – Comfort Plus – Comfort P80 – Delizia – Divina – Divina Plus – Duchessa – Ecologica – Ecologica idro – Emma – Emma Plus – Esmeralda – Graziosa – Graziosa Plus – Irinia – Presiosa – Tosca Plus.

-ARENAS
-PELLET PLUS
-QLIMA ref. 19900019 mod. Delmara 88 S-line – Delmara 125 S-line – Diandra 60 S-line – Diandra 90 S-line – ref. 410006 mod. Delfina III 90 M-line – Fiorina 103 S-line – Fiorina 74 S-line – Fiorina 90 S-line – Tectro TBH 558 – Tectro TBH 564 – Tectro TBH 565 – Tectro TBH 570 – Ronda 100 S-line – Ronda 80 glass – Ronda 80 S-line
-RAVELLI
-WOOD
-XIANG
-RAVELLI

USING THE GEAR MOTOR K9115062

The Kenta 2 rpm gear motor Code K9115062 proposed by Xodostore – Shaft ø 8.5 mm – Lamellar pack 30 mm Kenta installed on pellet appliances has the task of rotating the auger in the pellet tank, transporting it to the crucible to be burned, or the increasingly used automatic brazier cleaning systems present on many biomass stoves and boilers. The auger is positioned in such a way as to pick up the pellets from the bottom of the tank and then transport them to the top of the stove Once at the top of the auger, the pellets naturally fall into a chute that will accompany them inside the burner.

MAIN FEATURES OF KENTA GEARED MOTORS

The gearbox box is made of die-cast zamak and incorporates fixings
for the application. The kinematic chain of the gears consists of: helical tooth crankshaft, gears made of special thermoplastic materials and gears made of sintered steel. This system guarantees high reliability by allowing K911 gearmotors the possibility of applications in cold (e.g. chillers) and hot (e.g. ovens) environments. The gearbox housing has 2 through fixing holes and 5 fixing holes with a maximum penetration of 4 mm. The K911 AC gearmotors use two-pole single-phase asynchronous motors with short-circuit turns and
pre-set direction of rotation. The dimensions of the engines are fixed in terms of width and height (61 x 61
mm) while the thickness of the engine pack is available in 4 sizes: 16 – 20 – 30 – 40 mm. The winding of the coils is made by means of an automatic system equipped with wire-stabilized
tension control. The electrical connections are made by means of 6.3 x 0.8 fastons applied with a solderless insulation displacement system (UL approved Amtronics system) which prevents false contacts. Available voltages and frequencies: from 24 to 240 V and 50/60 Hz.
The K911 DC geared motors use brushed DC motors with permanent magnet
for 12 and 24 V power supply. These motors allow for dual rotation

FOLLOW US ON INSTAGRAM!