Description
WIFI remote control for all pellet stoves MICRONOVA electronics amazon alexa
The WiNet wifi module for pellet stoves can be connected to the following stoves (and many other brands with Micronova electronic board produced since 2005):
AMG SPA pellet stoves*
ANSELMO COLA pellet stoves
CADEL pellet stoves*
EXTRAFLAME pellet stoves
Pellet stoves CANADIAN STOVE
KLOVER pellet stoves
PIAZZETTA pellet stoves
Pellet stoves LAMINOX – LAMINOX-IDRO
EDILKAMIN* pellet stoves
ITALIANA CAMINI pellet stoves*
ADLER pellet stoves
KARMEK ONE pellet stoves
JOLLYMEC pellet stoves*
UNGARO pellet stoves*
LINCAR pellet stoves
PASIAN pellet stoves
Pellet stoves PHEBO STOVES
KALOR* pellet stoves
TEPOR pellet stoves*
BRONPI pellet stoves
Pellet stoves produced by COSTRUZIONI MECCANICHE SPA
FLUMENFIRE pellet stoves
PALAZZETTI pellet stoves*
ROYAL* pellet stoves
NOBIS pellet stoves
OPTIMA pellet stoves
ALFAPLAM pellet stoves
THERMASIS pellet stoves
FAIR EUROPE pellet stoves
GIGRACO pellet stoves
ENVIRO FIRE* pellet stoves
KAUSIFLAM pellet stoves
DEVILLE pellet stoves*
Pellet stoves CALOR ITALY
SICALOR pellet stoves
SIDEROS pellet stoves
SISA pellet stoves
THUN pellet stoves
GLOBE-FIRE pellet stoves
Ecoteck pellet stoves
Elledi pellet stoves
(*) with Micronova electronics
The features available are the following (both locally and remotely):
– Stove switching on and off
– Display of the room temperature read by the probe installed in the stove
– Temperature set adjustment
– Adjustment of the operating power
– Setting the room temperature for the stoves that manage the set with adjustment to 0.5 °C
– Programmable thermostat based on temperature set
– Programmable thermostat with 4 time slots for each day of the week, independent from the one managed by the stove’s electronics
– For PIAZZETTA stoves :
Possibility to manage the 4 operating powers by limiting them from the app.
If the stove is equipped with ducting fans, it is possible to manage them by enabling this feature remotely (on older products it may not be possible)
– Device firmware that can be updated online to keep it up to date with new features made available
The package includes both the cable for connection to the serial port (located on the back of the stove) and the one for direct connection to the stove’s electronic board (accessible by unscrewing a side/backrest).
All WiNet wifi modules allow you to turn the pellet stove on and off with Amazon Alexa
DESCRIPTION
WINET works with most stoves equipped with a Micronova electronic board: it is compatible with stove models produced from 2005 onwards. Thanks to the remote assistance service, you can speak with one of our technicians and receive the correct configuration for your stove within a few minutes.– Manage stove switching on and off – Display the room temperature read by the probe installed in the stove – Adjust the temperature set – Adjust the operating power – Set the room temperature
– Manage the programmable thermostat based on temperature set
– Use and program the programmable thermostat with 4 time slots for each day of the week, independent from the one managed by the stove’s electronics
– Switching the stove on and off with Amazon Alexa
EASY INSTALLATION
Installing WINET is very simple: just connect one of the two cables supplied to the serial port of the stove. The serial port can be at the back of the stove (9-pin connector) or directly on the electronic board (comb connector with 4-pin). Winet does not require a separate power supply!
OUTDOOR TEMPERATURE PROBE
Thanks to the external wireless temperature probe (optional) you can detect the temperature of the rooms in your home exactly where you need it.
The probe is rechargeable (a simple microUSB charger for smartphones is enough) and a charge can last up to 8 months depending on the chosen sampling rate.
Reviews
There are no reviews yet.