Gas Connector ALFA FORNI

Description

Gas Connector ALFA FORNI

DESCRIPTION

Alfa has created the first gas regulator with quick coupling and cylinder level indicator, easy to install, safe and certified. The gas regulator is used to adapt the gas pressure of the cylinder to your Alfa pizza oven. What makes the Alfa gas pressure regulator unique is the special quick coupling. Quick to connect and easy to use, it is particularly useful when you need to move the oven: in this case, in fact, you can easily detach the cooking tool from the cylinder in total safety.

THE COMPONENTS

• Female thread bolt for cylinder
• Pressure gauge for checking the pressure of the LPG
  present in the cylinder with quantity indicator and
  leak detection with gas passage closure.
• Pressure regulator with a filter to
  prevent the introduction of foreign bodies contained in the gas.
• Certified rubber hose
• 1/2″ quick coupling certified for gas use. Female part
  integrated on the pressure
  regulator hose and male part to be mounted on the gas ramp.

• STEP 2 : Release the male part from the gas hose by pulling back the knurling on the quick coupler. As you can see from the photo, always use both hands to detach the two components so as not to damage the binding.
• STEP 3 : Connect the male part to the gas ramp, first by hand then with the help of a 25 wrench. Check for the included gasket. If leaks are detected, use Teflon to seal the connection.
• STEP 4 : Connect the hose thanks to the quick coupling-release system by applying a slight force.

Instruction Manual

FOLLOW US ON INSTAGRAM!