Kenta gearmotor for pellet stoves (Cod: K9117157). Speed: 5 rpm, Shaft diameter: 8.5 mm (Rif.Int. 2056)

Description

Kenta gearmotor for pellet stoves (Cod: K9117157). Speed: 5 rpm, Shaft diameter: 8.5 mm (Rif.Int. 2056)

DESCRIPTION

Reference K9117157

Suitable for use in applications where low speed and high torque are required, the Kenta K9117157 gearmotor is specifically designed to be used as a rotor to power pellet stoves. 911 series, nominal torque 21Nm, absorption 32Watt, speed 5rpm, clockwise rotation, hollow shaft diameter 8.5mm, 40mm reed valve pack, power supply 220 V AC – 50/60Hz.

INTERCHANGEABLE WITH THE FOLLOWING MODELS

KENTA : K9117155, K9117163, K9117164, K9117169, K9117165, K9177315 MELLOR : KB1008

MOUNT ON STOVES

– ENVIRONMENT WARMTH
-BESTFIRE
-CADEL Ref. COM0232 Mod. Adina – Aida – Erika – Slim – Titania Ref. 4D14513005 Mod. Diana – Family – Martina – Nice – Solaris – Vanessa – Venus – Wall -DEVILLE ref. D0026179 mod. Kerdonis – Lilia – Lohic – Vestalis

-EUROFIAMMA
-EUROSTEK
-EVACALOR
-FAIR
-FREEPOINT
-ITALFLAME
-ITALIAN FIREPLACES
-KARMEK ONE ref. SML700-00AC mod. Air force one – Alice – Alice 2018 – Alice canalized – Alice 2018 canalized – Amelia – Aquos – Barcelona – Berlin – Berlin 1 – Bilbao – Bonn – Como – Elektra – Elena – Florence – Florence Plus – Giove – Greta – Ibiza – Leon – Linda – Lisbon – London – Lucca Plus – Madrid – Marina 24-34 – Marta – Mars – Mary 15-20 – Marylin – Milena – Nikita steel – Nice – Oslo – Paris – Rome – Samantha – Saturn – Siena – Stockholm – Stockholm Plus – Valencia – Warsaw Steel – Venus – Venice – Vigo ref. SML701-00AC mod. Granada – Malaga – Marina 24-34 LCD – Marina 24-34 TOUCH – Mary 15A-20 LCD – Mary 15A-20 TOUCH – Osaka steel – Tokyo steel

-KING FIRE
-MECATECH
-MG
-PIGAL
-PUROS
-QLIMA
-TECNOFLAM
-TMC
-ZIBRO Ref. COM0232 Mod. Adina – Carmen – Titania – Tosca

USING THE GEAR MOTOR K9117157

The Kenta 5 rpm gear motor Code K9117157 proposed by Xodostore – Hollow ø shaft 8.5 mm – 40 mm lamellar pack installed on pellet appliances have the task of rotating the auger in the pellet tank transporting it to the crucible to be burned, or the increasingly used automatic brazier cleaning systems present on many biomass stoves and boilers. The auger is positioned in such a way as to pick up the pellets from the bottom of the tank and then transport them to the top of the stove Once at the top of the auger, the pellets naturally fall into a chute that will accompany them inside the burner.

MAIN FEATURES OF KENTA GEARED MOTORS

The gearbox box is made of die-cast zamak and incorporates fixings
for the application. The kinematic chain of the gears consists of: helical tooth crankshaft, gears made of special thermoplastic materials and gears made of sintered steel. This system guarantees high reliability by allowing K911 gearmotors the possibility of applications in cold (e.g. chillers) and hot (e.g. ovens) environments. The gearbox housing has 2 through fixing holes and 5 fixing holes with a maximum penetration of 4 mm. The K911 AC gearmotors use two-pole single-phase asynchronous motors with short-circuit turns and
pre-set direction of rotation. The dimensions of the engines are fixed in terms of width and height (61 x 61
mm) while the thickness of the engine pack is available in 4 sizes: 16 – 20 – 30 – 40 mm. The winding of the coils is made by means of an automatic system equipped with wire-stabilized
tension control. The electrical connections are made by means of 6.3 x 0.8 fastons applied with a solderless insulation displacement system (UL approved Amtronics system) which prevents false contacts. Available voltages and frequencies: from 24 to 240 V and 50/60 Hz.
The K911 DC geared motors use brushed DC motors with permanent magnet
for 12 and 24 V power supply. These motors allow for dual rotation

FOLLOW US ON INSTAGRAM!