Share

Kenta gearmotor for pellet stoves (SKU: K9115006). Speed: 1.5 RPM, Shaft Diameter: 8.5 MM (RIF.INT. 2069)

60,00

All products are shipped by express courier.
Shipping is free for all of Italy with the exception of islands and disadvantaged areas.

For disadvantaged islands and postal codes, you can request a quote on shipping costs by writing to vendita@xodostore.com

Description

Kenta gearmotor for pellet stoves (SKU: K9115006). Speed: 1.5 RPM, Shaft Diameter: 8.5 MM (RIF.INT. 2069)

 

DESCRIPTION

K9115006

Kenta gearmotor for pellet

stoves Speed: 1.5 rpm.

Reed valve pack: 30 mm.

Shaft: hollow diameter 8.5 mm.

Flattening: double.

Direction of rotation: clockwise.

Nominal torque: 32 Nm.

 

Suitable for use in applications where low speed and high torque are required, the Kenta K9115006 gearmotor is specifically designed to be used as a rotor to power pellet stoves. 911 series, nominal torque 32Nm, absorption 25Watt, speed 1.5rpm, clockwise rotation, hollow shaft diameter 8.5mm, 30mm reed valve pack, power supply 220 V AC – 50/60Hz.

 

MOUNT ON STOVES

-E.L FIRE
-KARMEK ONE ref. SML999-00 mod. Asia – Bern – Bilbao S – Ibiza S – Ibiza SC – Leon S – Leon S Plus – Leon SC Plus – Lyon – Lisbon S – Minerva acciaio – Valencia S Plus – Vigo S – Vigo S Plus – Vigo SC Plus

 

USING THE GEAR MOTOR K9115006

The Kenta 1.5 rpm gear motor Code K9115006 proposed by Xodostore – Hollow ø shaft 8.5 mm – 30 mm lamellar pack installed on pellet appliances have the task of rotating the auger in the pellet tank transporting it into the crucible to be burned, or the increasingly used automatic brazier cleaning systems present on many biomass stoves and boilers. The auger is positioned in such a way as to pick up the pellets from the bottom of the tank and then transport them to the top of the stove Once at the top of the auger, the pellets naturally fall into a chute that will accompany them inside the burner.

 

MAIN FEATURES OF KENTA GEARED MOTORS

The gearbox box is made of die-cast zamak and incorporates fixings
for the application. The kinematic chain of the gears consists of: helical tooth crankshaft, gears made of special thermoplastic materials and gears made of sintered steel. This system guarantees high reliability by allowing K911 gearmotors the possibility of applications in cold (e.g. chillers) and hot (e.g. ovens) environments. The gearbox housing has 2 through fixing holes and 5 fixing holes with a maximum penetration of 4 mm. The K911 AC gearmotors use two-pole single-phase asynchronous motors with short-circuit turns and
pre-set direction of rotation. The dimensions of the engines are fixed in terms of width and height (61 x 61
mm) while the thickness of the engine pack is available in 4 sizes: 16 – 20 – 30 – 40 mm. The winding of the coils is made by means of an automatic system equipped with wire-stabilized
tension control. The electrical connections are made by means of 6.3 x 0.8 fastons applied with a solderless insulation displacement system (UL approved Amtronics system) which prevents false contacts. Available voltages and frequencies: from 24 to 240 V and 50/60 Hz.
The K911 DC geared motors use brushed DC motors with permanent magnet
for 12 and 24 V power supply. These motors allow for dual rotation

 

 

 

Additional information

Weight 2 kg
BRAND

KENTA

SPEED

1.5 RPM

LAMELLAR PACK

30 MM

TREE

CABLE DIAMETER 8.5 MM

FLATTENING

SINGLE

DIRECTION OF ROTATION

SCHEDULE

NOMINAL TORQUE

32 NM

Reviews

There are no reviews yet.

Be the first to review “Kenta gearmotor for pellet stoves (SKU: K9115006). Speed: 1.5 RPM, Shaft Diameter: 8.5 MM (RIF.INT. 2069)”

Your email address will not be published. Required fields are marked *

Shopping cart0
There are no products in the cart!
Continue shopping
0

Free Shipping for orders over €100.00