Mellor gearmotor for pellet stove (Cod: FB1255) 4 rpm – shaft: 9,5 mm – pack 32 mm (Rif.Int. 2008)

Description

Mellor gearmotor for pellet stove (Cod: FB1255) 4 rpm – shaft: 9,5 mm – pack 32 mm (Rif.Int. 2008)

DESCRIPTION:

Reference FB1255 Gear motor for pellet stoves T3 series, 220VAC power supply. Speed: 4 rpm. Reed valve: 32 mm. Shaft diameter: 9.5 mm. Flattening: double. Direction of rotation: clockwise. Nominal torque: 28 Nm.

Suitable for use in applications where low speed and high torque are required, the FB1255 gearmotor is specifically designed to be used as a rotor to power pellet stoves. T3 series, nominal torque 28Nm, absorption 36Watt, speed 4rpm, clockwise rotation, shaft diameter 9.5mm, 32mm reed valve pack, power supply 220 V AC – 50/60Hz.

INTERCHANGE THEM WITH THE FOLLOWING MODELS

MELLOR: FB1323

MOUNT ON STOVES

-MONTEGRAPPA FIREPLACES

-KAUSIFLAM

-VZ LINE

-NORDICA EXTRAFLAME

-RAVELLI

USING THE FB1255 GEARMOTOR

The Mellor 4 rpm gear motor Code FB1255 proposed by Xodostore – Shaft ø 9.5 mm – 32 mm lamellar pack installed on pellet appliances have the task of rotating the auger in the pellet tank transporting it to the crucible to be burned, or the increasingly used automatic cleaning systems of the brazier present on many biomass stoves and boilers. The auger is positioned in such a way as to pick up the pellets from the bottom of the tank and then transport them to the top of the stove Once at the top of the auger, the pellets naturally fall into a chute that will accompany them inside the burner.

MAIN FEATURES OF MELLOR GEARED MOTORS:
-Nominal torque: from 2.5 up to 35Nm, depending on the reduction
ratio-Available speed: from 0.3 to 11rpm-Typical
applications: all those that require bidirectional rotations with low and precise speed, high torque and very
low noise.
Designed for pellet stove, boiler and fireplace boiler applications

FOLLOW US ON INSTAGRAM!