Pellet stove MCZ RAY COMFORT AIR 8 UP! M2 Serpentine

Description

Pellet stove MCZ RAY COMFORT AIR 8 UP! M2 Serpentine

Ray is a ducted pellet stove with a reduced depth (28.6 cm). It is available with a stone front. The flue outlet can be on the top, to reduce the overall footprint even more.

THE HEAT THAT GOES FAR AWAY

This is a ducted stove, which allows you to heat several rooms at the same time. The hot air produced by the stove is transported to other rooms in the house through wall pipes. With the Comfort Air® system, patented by MCZ, the air can reach up to 8 meters away and guarantees an outlet temperature of up to 80°C.

IGNITION SPEED

Thanks to the new ceramic glow plug, the flame appears in less than three minutes, with a 40% reduction in ignition times and a significant reduction in electricity consumption.

“BRUSHLESS” GEAR MOTOR

The “brushless” gearmotor, made exclusively for MCZ, is used in the pellet loading auger. Compared to traditional gearmotors, it is more powerful, quieter and less energy-intensive (electricity consumption reduced by 90% compared to traditional motors).

WATERTIGHT CONSTRUCTION AS STANDARD

Thanks to a perfectly sealed combustion chamber, this product works by taking oxygen exclusively from the outside and giving lower consumption and perfect thermal comfort in the most modern homes, even those in class A, without any risk of smoke emissions into the environment.

SPECIFICATIONS

Nominal heat output: 7.8 kW Minimum heat output: 3.6 kW Maximum efficiency: 90.2 % Minimum efficiency: 90.1 % Minimum hourly consumption: 0.8 kg/h (**) Maximum hourly consumption: 1.75 kg/h (**) Minimum autonomy: 23 h (**) Maximum autonomy: 10 h (**) Tank capacity: 28 lt Heatable volume with 20W/m³ requirement: 390 m3 (*) Heatable volume with 35W/m³ requirement: 223 m3 (*) Heatable volume with 40W/m³ requirement: 142 m3 (*)

Energy efficiency class: A+

Smoke outlet diameter: 80 cm Weight: 155 kg Smoke temperature: 179 °C Smoke mass flow rate: 4.7 g/s (*) The declared volume represents the number of cubic metres that can be heated by the product based on the average needs of the house (expressed in W/m3). The values shown are purely indicative, for mandatory energy calculations a dedicated evaluation by a professional is required. (**) Data that may vary depending on the fuel used.

SHEET