5 Star hermetic pellet stove MONTEGRAPPA NXS 10 EVO STAMPO EVO

Description

5 Star hermetic pellet stove MONTEGRAPPA NXS 10 EVO STAMPO EVO

The trapezoidal shape, the sloping front, the large buttonholes distinguish the contemporary design of Timbro Evo, designed to fit perfectly into environments with modern and minimal furnishings. The structure and cladding are made of painted steel. The combustion chamber is decorated with an elegant pattern. The Timbro Evo upholstery is available in two colors: metallic gray and black.

– Control panel equipped with backlit graphic display with digital icons TOUCH SCREEN – SMART ventilation: advanced software for the intelligent management of the ambient air fan that allows the stove to operate in silent mode ensuring excellent comfort – Intuitive software with setting of both the room temperature and the maximum operating power. Equipped with STAND-BY function to maintain the desired comfort of the indoor environment – Programmable thermostat with settable temperature and with the possibility of choosing the operating power of each programmed time slot – Continuously rotating gear motor – Electronic board with the possibility of managing external thermostats – Cylindrical cast iron burner equipped with flame breaker deflector – Ignition pipe inserted inside the burner, always guarantees perfect ignition of the product – TUTOR efficient combustion control system – Modern removable cast iron hearth sides – Double ducting, served by 2 independent centrifugal fans – Double flue gas circuit lateral to the combustion chamber – Advanced lateral heat exchanger, in steel, composed of tubular ducts and fins communicating between the sides of the combustion chamber and the external walls, for heating ducted air – Heat exchanger, rear and upper to the combustion chamber, made of steel, for heating ambient air – Probe for detecting the room temperature – Safety thermostat – Safety pressure gauge – Tangential ambient air fan – Removable ash drawer – Adjustable non-slip feet for correct leveling – Wi-Fi module (optional)

NXS 10 EVO STAMP

body size + cover: L 46 x P 52 x H 109 cm

Technical data

mm

power

consumption

Mass

gas temperature

capacity

outlet pipe

power

Quality class (D.M. 186 – 7/11/2017)
overall heat output (at the hearth)	9.8		Kw
Certified	4.1 – 8.9		Kw
power output to ducting	2.5 + 2.5 (55%)		Kw
CO measured (at 13% oxygen)	0.0165		%
Yield (η)	90.9		%
Primary Particulate Matter (PP) at 13% oxygen	14		mg/Nm3
COT (at 13% oxygen)	4		mg/Nm3
Fuel	0.92 – 2.04		kg/h
flow rate of fumes	4.0 – 5.5		g/s
Flue	99-154		°C
draught (vacuum at the chimney)	9		Pa
Tank	18		Kg
autonomy	19.5 – 8.5		h
Smoke	Ø 80		Mm
air inlet for combustion	Ø 50		Mm
Heatable surface with certified	102		*sqm
net weight	77		Kg
Weight with packaging	88		Kg
* with the conditions shown in the General Catalogue
product in possession of the requirements for achieving the “5 stars” Clean Air