KENTA GEAR MOTOR FOR PELLET STOVE K9115122, 8.5MM HOLLOW SHAFT, 3RPM-2070

Description

KENTA GEAR MOTOR FOR PELLET STOVE K9115122, 8.5MM HOLLOW SHAFT, 3RPM-2070

GEAR MOTOR REFERENCE CODE: K9115122

LAREL GEAR MOTOR REFERENCE CODE: 14702070

FEATURES:

Kenta K9115122 gearmotor

Speed: 3 rpm.

Reed valve pack: 30 mm.

Shaft: hollow diameter 8.5 mm.

Flattening: double.

Direction of rotation: clockwise.

Nominal torque: 16 Nm.

Suitable for applications where low speed and high torque are required, the Kenta K9115122 gearmotor is specifically designed to be used as a rotor to power pellet stoves.

911 series, nominal torque 16Nm, absorption 25Watt, speed 3rpm, clockwise rotation, hollow shaft diameter 8.5mm, 30mm reed valve pack, power supply 220 V AC – 50/60Hz.

SUITABLE FOR THE FOLLOWING MODELS:

– MONTEGRAPPA FIREPLACES ref. 1044000700 mod. Aktiv 22 – Aktiv 27 – Aktiv 32 – Pellet Plus 15000 Power 25

– KARMEK ONE ref. SML974-00 mod. Air force one – Bern – Florence – Florence Plus – Giove – Leon S Plus – Leon SC Plus – Lyon – Lucca Plus – Marina 24-34 LCD – Marina 24-34 TOUCH – Marte – Mary 15A-20 LCD – Mary 15A-20 TOUCH – Minerva steel – Osaka steel – Seville steel – Stockholm Plus – Tokyo steel – Valencia S Plus – Venere – Vigo S Plus – Vigo SC Plus

MAIN FEATURES OF KENTA GEARED MOTORS

The gearbox box is made of die-cast zamak and incorporates fixings
for the application.

The kinematic chain of the gears consists of: helical tooth crankshaft, gears made of special thermoplastic materials and gears made of sintered steel.

This system guarantees high reliability by allowing K911 gearmotors the possibility of applications in cold (e.g. chillers) and hot (e.g. ovens) environments.

The gearbox housing has 2 through fixing holes and 5 fixing holes with a maximum penetration of 4 mm.

The K911 AC gearmotors use two-pole single-phase asynchronous motors with short-circuit turns and
pre-set direction of rotation.

The dimensions of the engines are fixed in terms of width and height (61 x 61
mm) while the thickness of the engine pack is available in 4 sizes: 16 – 20 – 30 – 40 mm.

The winding of the coils is made by means of an automatic system equipped with wire-stabilized
tension control.

The electrical connections are made by means of 6.3 x 0.8 fastons applied with a solderless insulation displacement system (UL approved Amtronics system) which prevents false contacts.

Available voltages and frequencies: from 24 to 240 V and 50/60 Hz.
The K911 DC geared motors use brushed DC motors with permanent magnet
for 12 and 24 V power supply.

These motors allow for dual rotation

FOLLOW US ON INSTAGRAM!